Menu

MPQ1000

Analizador portátil de la calidad de la energía

  • Reconocimiento automático de transformadores de corriente (TC)
  • Verificación de conexión automática
  • nálisis de datos incorporado
  • Soporte para tarjeta SD y memoria USB
  • Rango de 1000 V CA y 1000 V CC
  • Modos de osciloscopio y DMM
  • CATIV @ 600 V
  • Conformidad con IEC61000-4-30 Clase A 

El analizador de calidad de energía portátil MPQ1000 tiene características que lo hacen ideal para la solución de problemas sobre la calidad de la energía, para pruebas de cumplimiento y auditorías energéticas. La identificación automática del CT elimina errores potenciales debido a ajustes de rango de CT incorrectos. El analizador identificará automáticamente el CT y verificará que está conectado correctamente. Esto significa que usted puede estar seguro de que tendrá los datos correctos.

Pero el hardware no es todo. El MPQ1000 de Megger le ofrece la posibilidad de realizar pruebas inteligentes, a través de su software, líder en la industria, que le permite minimizar errores durante las pruebas y analizar rápida y fácilmente sus resultados. Por ejemplo, puede crear sus propias plantillas estándar de empresa que se pueden almacenar y comparar, así como comprobar sus resultados con respecto a los estándares de cumplimiento. Esto ahorra tiempo, esfuerzo y costos, haciendo que todo el proceso de prueba sea más eficiente.

Además, el software crea automáticamente configuraciones personalizadas basadas en el problema que está solucionando, ya sea el disparo del equipo, los problemas del transformador o del motor, el análisis EN50160 o el análisis general de PQ. Esto asegura que el analizador capturará el fenómeno de la calidad de energía que causa esos problemas. Usted no tiene que ser un expert en PQ para llevar a cabo un análisis exhaustivo.

{^youtubevideo|(width)560|(height)340|(rel)True|(autoplay)False|(fs)True|(url)http://www.youtube.com/watch?v=1L6F93liSZ4|(loop)False^}

Documentos de producto
Quick start
Quick start guide - MPQ1000 (EN, FR, DE, ES)
Technical Documents
Guía Técnica
Motor Analysis with the MPQ1000
Guía Técnica
Registradores clase A
Guía Técnica
Common PQ issues: transients
Guía Técnica
Common PQ issues: voltage dips and swells
Guía Técnica
Determining harmonic direction
Guía Técnica
Introduction to harmonics
Guía Técnica
Measuring current on a CT secondary circuit
Guía Técnica
Operación del MPQ con un Puente Inalambrico
Guía Técnica
PQ influences on telecommunications
Guía Técnica
Renaming test files on the MPQ units
Guía Técnica
Scheduled run - MPQ series of power quality analysers
Guía Técnica
Tarjetas SD para la serie MPQ
Guía Técnica
Transferring data from the MPQ to the PC
Megger PQ Firmware for MPQ Series PQ Analysers

The new MPQ firmware version 1.408 along with the new PC software version 2.7.2.4 will allow the MPQ to capture event waveforms up to 3600 cycles in duration and incorporates all the improvements and bug fixes of the previous update.

MPQ firmware version 1.407 firmware and application code 1.1.0.44 supports both the MPQ1000 and MPQ2000. It incorporates the following bug fixes and software enhancements.

Bug Fixes

  • The MPQ now auto detects the 20A and 10CT ranges.
  • The scope mode now recognizes the CT range.
  • The 4 wire 2.5 wattmeter calculation has been corrected.
  • Auto Analysis now functioning with larger files.

 

Enhancements

New On Board Setup: Update the setups on the front panel of the MPQ. From the DMM screen scroll to SETUP and press the ENTER key to access the new setup screens.        

New AUTO mode: The MPQ will now measures the voltage & frequency and automatically set the appropriate limits. Simply connect the MPQ, select the setup configuration & start recording. The MPQ does everything else.          

Unlimited Recording Time: The MPQ Analyzer will record data files up to 100M. When the data file reaches 100M it will automatically start a new data file. It will record until the 32G card is full. This means the unit can record for literally year’s non-stop. Record inrush on motors for days or weeks.

Remote monitoring time sync: The MPQ Analyzer can automatically time sync to your network periodically. No need to pay extra for GPS then to just worry about losing the signal. Keep all the units on the network perfectly synced.

CT Prompt added to preferences screen. If CT prompt is enabled then the analyzer will display a warning message if the CT range does not match the range programmed in the setup file. If the CT prompt is disabled then the analyzer will automatically use the auto identified CT range and dislay no message. 

When connected to a 3 phase wye the unit will now display both the phase to neutral values as well as the phase to phase values.

Calculated 3rd Phase: When the MPQ is connected to a delta it will automatically calculate the 3rd phase values. The MPQ will also allow the user to view the Delta as a wye. This means you can view both the phase relationships within the delta and the phase relationships to the load.

 

Download and Install instructions

  • Please download the Executable file “MPQUpdateMaker_BF_MPQ_3600_Cycle_1_408.exe” to a workstation where the installer can transfer the files and folder structure to a preferably blank USB Thumb Drive with at least 8 MB of available space and that does not have a MEGGER folder at its root.
  • With the Thumb Drive installed into the workstation, execute the downloaded file which will locate all installed removable media and display it.
  • Choose the thumb drive to be used for updating the MPQ equipment and then proceed with the installation.
  • After the installation completes, please eject the thumb drive which is now ready to use with the MPQ1000 or MPQ2000 instruments to be updated.
Instrument firmware and application update thumb drive installation software
MPQ-Firmware.zip
2,3 MB | 14/09/21
Firmware Update 2019.06.14 (B)
Megger PQ PC Software for MPQ Series PQ Analyzers

The new Metrosoft MPQ PC Software version 2.7.2.4 adds support for the MPQ capture  of event waveforms up to 3600 cycles and incorporates the following bug fixes and software enhancements from update   2.6.2.1.

Bug Fixes

  • Displacement Power Factor (DPF) Auto scaling now functions properly.
  • Scheduled download now functioning.
  • Auto analysis of current harmonics is now functioning.
  • Various translation corrections were made.

 

Enhancements

Connection Images: For every setup configuration of the MPQ new connection diagrams have been added, showing how to connect the analyzer.

Comtrade Export: Any recorded event can now be exported as a Comtrade file. It can then be played back to see how your protection equipment responds to them.

AUTO mode added to the Data Analysis: The software will automatically determine the nominal values in your recorded data file and perform an analysis based on those values.

New Harmonic Analysis Screen for DC: The harmonic analysis screen is now configurable. Set the analysis to be based in harmonic order & percent of fundamental for AC or frequency and value for DC. This is needed when troubleshooting DC systems.

Event Arrows: When viewing a chart arrows will indicate where the dips and swells occurred. Now simply click on the arrow to view the event

 

Download and Install instructions

Download the file MPQ_Megger_Muti-Language_2-7-2-4.exe to the computer it should be loaded on and execute the file.

PC MPQ Software installer
MPQ_PC_Multi-Language_2_8_2_1.exe
26,3 MB | 14/09/21
Link User guide - Megger power quality software
MPQ-SWG-EN-V05.pdf
4,2 MB | 14/09/21