DELTA4000

The Megger Valley Forge, USA factory and select Megger Authorized Service Centers (ASCs) can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.

Carefully read all instructions and backup your data before performing any updates.

Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.

!! WARNING !!

Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.

If damage occurs from improper updates, customer is responsible for repair costs.

Update process

To update download the relevant files and follow the intructions in the documents reference below:

1. Install PowerDB Upgrade (11) [optional]:

a. Overview of Improvements

b. PowerDB 11 Install Instructions

c. Download PowerDB 11 (You will be redirected to www.powerdb.com/download)

d. Delta PC Quick Manual

2. Install Delta Manual Control 2.0.1 [MANDATORY FOR ALL UPGRADES]:

a. Overview of Improvements

b. Delta Control 2.0.1 Install Instructions

c. Download Delta Control 2.0.1 Installer 

3. Firmware Upgrade [software will notify you of upgrade requirement]:

a. Firmware Upgrade Instructions

The Megger Valley Forge, USA factory and select Megger Authorized Service Centers (ASCs) can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.

Carefully read all instructions and backup your data before performing any updates.

Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.

!! WARNING !!

Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.

If damage occurs from improper updates, customer is responsible for repair costs.

Update process

To update download the relevant files and follow the instructions in the documents reference below:

1. Install Upgrades [MANDATORY]:

Please refer to the version of PowerDB on your Delta 43XX to determine if this update applies to you. This can be accessed by going to Home -> Settings within PowerDB

a. Overview of Improvements

b. Delta 43XX Upgrade Instructions

c. Download Delta 43XX Upgrade Installer - PowerDB 11 - 308 MB

d. Delta 4310 Quick Manual

2. Firmware Upgrade [software will notify you of upgrade requirement]:

a. Firmware Upgrade Instructions

The following components have been updated:

PowerDB ________________ 11.1.4_22AUG18

MTOTestXP ______________ Release_2018.8.16.2

Instrument Config ______ 1.0.18051.2001

Splash Screen __________ 1.0.18047.1404

Factory Config _________ 1.0.18054.818

Megger Update Manager __ 1.0.18043.0955

Additionally this update will force the slider bars to be wide for improved touch screen usage.

Recommendations

- Megger recommends that you return your instrument annually for calibration verification.
- Any instrument returned for re-calibration will be updated with the latest firmware and software versions.
- Certified Factory Calibration is valid for one year.

Attention

Incorrect installation of updates or incomplete updates may cause the equipment to become unusable.

If damage occurs from improper updates, the customer may be responsible for repair costs.