Teleflex VX

Teleflex VX - TDR para localización de averías en cables

  • Medición de reflexión trifásica (TDR)
  • Representación de hasta 6 mediciones por reflexión
  • Dispone de todos los métodos de reflexión de arco eléctrico
  • ARMslide con 15 curvas por impulso ARM®
  • Todos los métodos de desacoplamiento de corriente ICE
  • Localización IFL de fallos intermitentes
  • Método de ondas transitorias Decay
  • Quemado con arco eléctrico
  • El Teleflex VX puede montarse en cualquier sistema de medición con bastidor de 19” o adquirirse como aparato portátil independiente. También es posible actualizar sistemas más antiguos.

The Teleflex VX presents the latest development of the Teleflex series. Like all Teleflex reflectometers, the Teleflex VX is specially designed to capture the fast processes during the fault location in power cables. It presents the consequent continuation of the Linux based Teleflex MX

The operation is reduced to the essential steps, and runs mostly automatically. The completely new hardware of the Teleflex VX with significantly improved parameters, as for example sampling frequency, pulse width and pulse amplitude results in ranges of up to 1000 km, but also in highest resolution in the close range.

Measuring hardware and display are separated, and communicate via Ethernet. This allows the easy integration into a fault location system and allows the operation in offshore application, for example, the remote operation in ROV’s.

MeggerBook Cable & MeggerBook Report Edition
MeggerBook Report Edition Quick Guide
809,3 KB | 20/02/20
MeggerBook Cable & MeggerBook Report Edition Software
The setup file below is suitable for the installation of both MeggerBook Cable (full version) and MeggerBook Report Edition (free limited version).
When started with a suitable license dongle plugged into the installation PC, the software starts as MeggerBook Cable which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here .
Without the required dongle the software starts as MeggerBook Report Edition which allows for seamless report creation and offers the same features as the full version while limiting the data storage options as follows:

•  Measurements, analyses and reports are not permanently stored in the database

•  While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor  of the Report Edition


At this time, the software can handle the measurement and test data of the following Megger devices:


Test vans:            Centrix, Centrix City, Compact City, R30, Variant

Test systems:     VLF Sinus 45 / 62, VLF CR 40/60, TDS 40/60

TDRs:                     Teleflex VX(-P), Teleflex SX


Note for test systems VLF Sinus 45 and VLF Sinus 62:


Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher.
58,9 MB | 04/08/20